Flaring Tool with Pipe Cutter

Flange Tool for Aluminium & Copper Pipes

First cut the pipe at right angles to the pipe axis using the pipe cutter supplied and deburr the pipe end using a pipe deburrer. Then slide the flare nut over the pipe and insert the pipe from below into the matching hole in the clamp. Allow the end of the pipe to protrude from the clamp to the first shoulder of the adapter. Tighten the clamp, starting with the wing nut closest to the pipe. Place the appropriate adapter on the pipe and apply a drop of oil to the flaring cone. Position the flaring tool over the clamp so that the undercuts on the flaring tool engage with the underside of the clamp. Centre the flaring tool over the adapter and turn the handle down until the adapter touches the clamp. For single flaring, follow the same steps but omit the adapter.